Drawing Parts by GLEICH Aluminium
Material G.AL®
Material G.AL®
We are aluminium! That means the manufacturing process of our in-house aluminium alloys is in our DNA. Under the brand name G.AL we combine various aluminium which serves as a quality bench mark in the market. This is achieved with a highly automated production process, a unique international single-slab heat treatment, as well as a team of specialists who love what they do.
What benefits do you have? You have available material, which ensures a minimum scrap quota. Your processing costs are reduced. Your customer is satisfied. Combine your Know-How with G.AL® and open up new opportunities in machining.
G.AL® in a nutshell means: ✔ rapid availability ✔ maximal stress relieved structure ✔ 100% traceability
G.AL® C250
Medium strength precision milled plate
Details
- Alloy: EN AW 5083 [AlMg4,5Mn0,7]
- Type of alloy: non heat-treatable
- Temper: 03
- Surface: Precision milled, Roughness Ra 0.4 µm, foil coated both sides
- very uniform flatness
- extremely low residual stress
- very good homogeneity
- very good corrosion resistance
- very good dimensional stability
- close tolerances for flatness, thickness and parallelism
G.AL® C250 Elox Plus
Medium strength precision milled plate
Details
- Alloy: EN AW 5083 [AlMg4,5Mn0,7]
- Type of alloy: non heat-treatable
- Temper: O3
- Surface: Precision milled, Roughness Ra 0.4 µm, foil coated both sides
- very good anodising properties
- highest reproducibility
- very fine grained structure
- very good polishability
- precisely milled
- very good flatness
- extremely low residual stress
- high strength
- very good homogeneity
- very good corrosion resistance
G.AL® C330
Higher strength precision milled plate
Details
- Alloy: EN AW 7021 [AlZn5,5Mg1,5]
- Type of Alloy: heat-treatable
- Temper: solution heat treated, quenched, artificially aged, T79
- Surface: two surfaces precision milled, roughness Ra 0.4 µm, foiled on both sides
- precisely milled surface
- extremely low residual stress
- very good machinability
- excellent form stability
- very high strength
- very good homogeneity
- excellent form stability
G.AL® C210R
Medium strength, six-sides sawn Plate
Details
- Alloy: EN AW 5083 [AlMg4,5Mn0,7]
- Type of Alloy: non heat-treatable
- Temper: O3
- Surface: six-sides sawn, roughness Ra <15 µm
- extremely low-stress properties
- very good form stability
- very good corrosion resistance
- short machining times
- available up to 1.100 mm thickness
G.AL® C210 Dynamic
Medium strength special plate
Details
- Alloy: EN AW 5083 [AlMg4,5Mn0,7]
- Type of Alloy: non heat-treatable
- Temper: O3
- Surface: six-sides sawn, roughness Ra <15 µm
- extremely low-stress properties
- very good machinability
- free of micro porosity, impermeable
- increased durability
- very good polishability
- very good attenuation properties
- suitable for applications under dynamic loads
G.AL® C330R
Higher strength, six-sides sawn Plate
Details
- Alloy: EN AW 7021 [AlZn5,5Mg1,5]
- Type of Alloy: heat-treatable
- Temper: solution heat treated, quenched, artificially aged, T79
- Surface: six-sides sawn
- very low-stress properties
- very good machinability
- very high strength
- extremely low residual stress
- very good form stability
- available up to 480 mm thickness
G.AL® C330 DYNAMIC
Higher strength special plate
Details
- Alloy: EN AW 7021 [AlZn5,5Mg1,5]
- Type of Alloy: heat-treatable
- Temper: solution heat treated, quenched, artificially aged, T79
- Surface: six-sides sawn, roughness Ra <15 µm
- very good machinability
- free of micro porosity, impermeable
- very high strength and hardness
- very good elongation
- very good attenuation properties
- very good polishability
- suitable for applications under dynamic loads
- increased durability